Background pattern
Berinert 1500

Berinert 1500

Ask a doctor about a prescription for Berinert 1500

This page is for general information. Consult a doctor for personal advice. Call emergency services if symptoms are severe.
About the medicine

How to use Berinert 1500

PATIENT INFORMATION LEAFLET

Berinert 1500

1500 IU
powder and solvent for solution for injection
Human C1-esterase inhibitor

Read the leaflet carefully before using the medicine.

  • You should keep this leaflet, you may need to read it again.
  • If you have any further questions, ask your doctor or pharmacist.
  • This medicine has been prescribed for you, do not pass it on to others. It may harm them, even if their symptoms are the same as yours.
  • If you experience any side effects, including those not listed in this leaflet, please inform your doctor or pharmacist.

Table of contents of the leaflet:

  • 1. What is Berinert and what is it used for
  • 2. Important information before using Berinert
  • 3. How to use Berinert
  • 4. Possible side effects
  • 5. How to store Berinert
  • 6. Contents of the pack and other information

1. WHAT IS BERINERT AND WHAT IS IT USED FOR

What is Berinert
Berinert is a medicine that comes in the form of a powder and solvent. After reconstitution, it is administered intravenously.
Berinert is produced from human plasma (the liquid part of the blood). Its active ingredient is a protein - human C1-esterase inhibitor.
What is Berinert used for
Berinert is used to treat and prevent hereditary angioedema (HAE) type I and II (swelling = edema). Hereditary angioedema is a congenital blood vessel disorder. It is not an allergic disease. It is caused by a deficiency, lack, or disorder of the synthesis of an important protein called C1-esterase inhibitor.
The disease is characterized by the following symptoms:

  • sudden swelling of the hands and feet,
  • sudden swelling of the face with a feeling of tension,
  • swelling of the eyelids, lips, swelling of the larynx with difficulty breathing,
  • swelling of the tongue,
  • severe abdominal pain. In principle, swelling can affect any part of the body.

2. IMPORTANT INFORMATION BEFORE USING BERINERT

This section of the leaflet contains information that you should consider before starting treatment with Berinert.

When not to use Berinert:

  • if you are allergic to C1-esterase inhibitor or any of the other ingredients of this medicine (listed in section 6).

Tell your doctor or pharmacist if you are sensitive to any medicine or food.

Warnings and precautions:

  • if you have had allergic reactions to Berinert in the past. As a precaution, take antihistamines and corticosteroids.
  • if you experience allergic symptoms or anaphylactic reaction (severe allergic symptoms can cause significant breathing difficulties or dizziness). Administration of

Berinert must be stopped immediately (i.e., the injection must be interrupted).

  • if you have had laryngeal edema. You should be closely monitored in a place where immediate medical intervention is possible (hospital).
  • if the medicine is used inconsistently with indications and dosage (e.g., capillary leak syndrome - CLS). See section 4. "Possible side effects".

Always consider the benefits and risks of using Berinert.
Virus safety
When medicines are produced from human blood or plasma, various measures are taken to protect the patient from the transmission of infectious agents. These methods include:

  • proper selection of blood and plasma donors to exclude the risk of transmitting infectious agents
  • testing each donation and plasma pool for infection markers.

Manufacturers of such medicines use methods of inactivation or removal of viruses during production.
Despite the use of the above methods, it is not possible to completely exclude the possibility of transmitting infectious agents after administering a medicinal product derived from human blood or plasma.
This risk also applies to unknown or newly discovered viruses and other infectious agents.
The measures taken are effective against enveloped viruses such as human immunodeficiency virus (HIV, the virus that causes AIDS), hepatitis B virus (HBV, which causes hepatitis B), hepatitis C virus (HCV, which causes hepatitis C), and non-enveloped viruses such as hepatitis A virus (HAV, which causes hepatitis A) and parvovirus B 19.
In patients who repeatedly receive products derived from human plasma, vaccination against viral hepatitis A and B should be considered.
Each time Berinert is administered, the administration date, batch number, and administered volume should be recorded in the patient's medical records.

Berinert and other medicines

  • Tell your doctor or pharmacist about any other medicines you are taking, including those available without a prescription.
  • Berinert must not be mixed in a syringe with other medicinal products or with other solvents.

Pregnancy and breastfeeding

  • If you are pregnant or breastfeeding, think you may be pregnant, or plan to have a child, consult your doctor or pharmacist before using this medicine.
  • During pregnancy and breastfeeding, Berinert should only be used if clearly necessary.

Driving and using machines

No studies have been conducted on the effects on the ability to drive and use machines.

Important information about some ingredients of Berinert

Berinert 1500 contains less than 1 mmol (23 mg) of sodium per vial, which means the medicine is considered "sodium-free".

3. HOW TO USE BERINERT

Treatment should be started and supervised by a doctor who has experience in using C1-esterase inhibitor in patients with deficiencies of this protein.

Dosage

Adults

Treatment of acute angioedema attack:
20 IU/kg body weight (20 IU/kg bw)
Preoperative prophylaxis of angioedema:
1000 IU less than 6 hours before medical, dental, or surgical procedure.

Children and adolescents

Treatment of acute angioedema attack:
20 IU/kg body weight (20 IU/kg bw)
Preoperative prophylaxis of angioedema:
15 to 30 IU/kg body weight (15-30 IU/kg bw) less than 6 hours before medical, dental, or surgical procedure. The dose should be chosen based on clinical circumstances (e.g., type of procedure and severity of the disease).
Overdose
No cases of overdose have been reported.

Reconstitution and administration

Berinert is usually administered intravenously by a nurse or doctor. The patient or their caregiver can also administer the injection, but only after proper training. If the doctor decides that the patient can undergo home therapy, they will provide detailed instructions. The patient will need to keep a treatment diary to document each injection performed at home. This diary should be taken to each doctor's visit. Regular verification of the patient's injection technique will be performed to ensure continuity of proper administration.
General instructions

  • The powder should be reconstituted and withdrawn from the vial in aseptic conditions. The syringe provided with the product should be used.
  • The prepared solution should be colorless and clear to slightly opalescent. After filtration or withdrawal from the vial (see below) and before administration, the solution should be carefully inspected for any impurities or sediment and for any change in color.
  • If the solution is cloudy or visible particles are present, do not administer the reconstituted medicine.
  • Unused medicine and any unused component of the kit should be disposed of in accordance with applicable regulations. Disposal instructions should be provided by the treating physician.

Method of reconstitution
Without opening the vials, warm the Berinert powder and solvent to room temperature.
This can be achieved by leaving the vials at room temperature for 1 hour or by holding them in your hands for a few minutes.
DO NOTheat the vials directly. The vials should not be heated above body temperature (37°C).
Carefully remove the caps from the vials containing the powder and solvent.
Wipe the injection site on the stopper with an alcohol swab (each vial with a separate swab) and let it dry.
The solvent can be combined with the powder using the provided Mix2Vial adapter.
Follow the instructions below.

1
Round base with a recess in the middle
  • 1. Open the packaging containing the Mix2Vial by removing the cap. Do not remove the Mix2Vial from the blister.
2
Vial with solvent connected to the Mix2Vial adapter with an arrow pointing down
  • 2. Place the vial with the solvent on a flat, clean surface and hold it firmly. Without removing the Mix2Vial adapter from the blister, place the blue end of the adapter with the spike onto the stopper of the solvent vial and push down vertically to puncture the stopper.
3
Mix2Vial adapter with a removable part and vial
  • 3. Holding the edge of the Mix2Vial adapter, carefully remove the blister by pulling it vertically upwards. Make sure to remove only the blister and not the entire Mix2Vial adapter.
4
Vial with solution and Mix2Vial adapter with an arrow pointing down
  • 4. Place the vial with the powder on a flat, hard surface. Invert the vial with the solvent and the attached Mix2Vial adapter and insert the spike of the transparent end of the adapter into the stopper of the vial with the powder, using a vertical downward motion. The solvent will automatically be transferred to the vial with the powder.
5
Vial with attached transparent end of the Mix2Vial adapter and an arrow indicating a rotary motion
  • 5. With one hand, grasp the part of the Mix2Vial adapter in the vial containing the solution, and with the other hand, hold the connector part on the side of the solvent vial. Carefully twist and separate the two parts of the connector. Remove the vial with the solvent from the Mix2Vial adapter with the blue end attached.
6
Syringe connected to the vial with solution and an arrow pointing down
  • 6. Gently swirl the vial with the attached transparent end of the Mix2Vial adapter, containing the solution, in a rotary motion until the powder is completely dissolved. Do not shake.
7
Syringe with vial and an arrow indicating a twisting motion
  • 7. Draw air into an empty, sterile syringe. Use the syringe provided with the product. Holding the vial with the medicinal product vertically with the stopper facing upwards, attach the syringe to the Luer Lock connector of the Mix2Vial adapter. Inject air into the vial.

Withdrawal and administration

8
Cell Image
  • 8. Holding the syringe plunger, invert the vial with the syringe and slowly withdraw the solution into the syringe.
9
Cell Image
  • 9. After filling the syringe with the solution, firmly hold the syringe cylinder (holding the syringe with the plunger facing downwards) and detach the transparent end of the Mix2Vial adapter from the syringe.

Administration
The prepared solution should be administered slowly intravenously.

4. POSSIBLE SIDE EFFECTS

Like all medicines, Berinert can cause side effects, although not everybody gets them.

Seek medical attention immediately if:

  • you experience any side effect or
  • you experience any symptom not listed in this leaflet.

In most patients, side effects after administration of Berinert are rare.
Rarely, the following side effects have been observed (may affect up to 1 in 1,000 patients):

  • During prophylaxis or treatment of patients with capillary leak syndrome (fluid leakage from small vessels into tissue), there is a risk of increased blood clot formation, e.g., during or after cardiac surgery using extracorporeal circulation. See section 2. "Warnings and precautions".
  • Increased body temperature, as well as a burning sensation and tingling at the injection site.
  • Hypersensitivity or allergic reactions, such as: irregular heartbeat, rapid heartbeat, decreased blood pressure, redness of the skin, feeling of heat and redness of the face, difficulty breathing, pain, and dizziness, nausea.

Very rarely (may affect up to 1 in 10,000 patients or single cases), hypersensitivity reactions can lead to shock.

Reporting side effects

If you experience any side effects, including those not listed in this leaflet, please inform your doctor or pharmacist. Side effects can be reported directly to the Department of Drug Safety Monitoring of the Office for Registration of Medicinal Products, Medical Devices, and Biocidal Products
Al. Jerozolimskie 181C
02-222 Warsaw
tel.: +48 22 49 21 301
fax: +48 22 49 21 309
Website: https://smz.ezdrowie.gov.pl
By reporting side effects, you can help provide more information on the safety of this medicine.
Side effects can also be reported to the marketing authorization holder.

5. HOW TO STORE BERINERT

  • Keep the medicine out of the sight and reach of children.
  • Do not use Berinert after the expiry date stated on the label and outer packaging after EXP.
  • Do not store above 30°C.
  • Do not freeze.
  • Store the vial in the outer packaging to protect it from light.
  • Berinert does not contain preservatives, and after reconstitution, it should be used immediately.
  • If the solution is not used immediately after preparation, it should be administered no later than 8 hours after preparation and should be stored only in the syringe.

The batch number of the product on the packaging with the administration set, outer packaging, and immediate packaging is stated after the abbreviation: Lot.

6. OTHER INFORMATION

What contains Berinert Active substance:

Human C1-esterase inhibitor (1500 IU/vial; after reconstitution in 3 ml water for injection: 500 IU/ml).
See the section "Information intended for healthcare professionals only" for more detailed information.
Excipients:
Glycine, sodium chloride, sodium citrate.
See the last paragraph of section 2. "Important information about some ingredients of Berinert".
Solvent:Water for injection

What Berinert looks like and contents of the pack

Berinert comes in the form of a white powder and solvent, which is water for injection.
The reconstituted solution should be colorless and clear to slightly opalescent.
Pack sizes
The pack with 1500 IU contains:
1 vial with powder (1500 IU)
1 vial with 3 ml water for injection
1 transfer system with a 20/20 filter
Administration set (inner packaging):
1 single-use syringe with a capacity of 5 ml,
1 injection set,
2 alcohol swabs,
1 non-sterile plaster

Marketing authorization holder and manufacturer

CSL Behring GmbH
Emil-von-Behring-Strasse 76
35041 Marburg
Germany

This medicinal product is authorized in the Member States of the European Economic Area under the following names:

Berinert 1500 IE Pulver und Lösungsmittel zur Herstellung einer Injektions _____________________________ Austria
Berinert 1500 ___________________________ Belgium, Cyprus, Germany, Greece, Luxembourg, Poland
Berinert 1500, 500 IU Powder and solvent for solution for injection __________________ Bulgaria
Berinert 1500 IU ________________________ Czech Republic, Slovakia
Berinert _______________________________ Denmark, Italy, Portugal
Berinert 1500 IU, injektiokuiva-aine ja liuotin, liuosta varten ___________________ Finland
Berinert 1500 UI, poudre et solvant pour solution injectable ______________________ France
Berinert 1500 NE por és oldószer oldatos injekcióhoz ______________________ Hungary
Berinert 1500 UI, pulbere și solvent pentru soluție injectabilă _________________ Romania
Berinert 1500 i.e. prašek in vehikel za raztopino za injiciranje ___________________ Slovenia
Berinert 1500 UI Polvo para solución Inyectable _____________________________ Spain
Berinert 1500 IU powder and solvent for solution for injection __________________ United Kingdom

Date of approval of the leaflet: October 2021

Information intended for healthcare professionals only.

QUALITATIVE AND QUANTITATIVE COMPOSITION

The activity of human C1-esterase inhibitor is expressed in international units (IU), which refer to the current WHO standards for C1-esterase inhibitor products.

Alternatives to Berinert 1500 in other countries

The best alternatives with the same active ingredient and therapeutic effect.

Alternative to Berinert 1500 in Ukraine

Dosage form: powder, 500 IU
Active substance: c1-inhibitor, plasma derived
Prescription required

Alternative to Berinert 1500 in Spain

Dosage form: INJECTABLE, 2000 IU
Active substance: c1-inhibitor, plasma derived
Manufacturer: Csl Behring Gmbh
Prescription required
Dosage form: INJECTABLE, 500 units of C1 inhibitor
Active substance: c1-inhibitor, plasma derived
Prescription required
Dosage form: INJECTABLE, 3000 IU
Active substance: c1-inhibitor, plasma derived
Manufacturer: Csl Behring Gmbh
Prescription required
Dosage form: INJECTABLE, 500 U
Active substance: c1-inhibitor, plasma derived
Manufacturer: Csl Behring Gmbh
Prescription required
Dosage form: INJECTABLE, 1500 IU
Active substance: c1-inhibitor, plasma derived
Manufacturer: Csl Behring Gmbh
Prescription required
Dosage form: INJECTABLE, 150 mg
Active substance: lanadelumab
Prescription required

Online doctors for Berinert 1500

Discuss dosage, side effects, interactions, contraindications, and prescription renewal for Berinert 1500 – subject to medical assessment and local rules.

Get updates and exclusive offers

Be the first to know about new services, marketplace updates, and subscriber-only promos.

Follow us on social media
FacebookInstagram
Logo
Oladoctor
Find a doctor
Doctors by specialty
Services
Choose language
© 2025 Oladoctor. All rights reserved.
VisaMastercardStripe