


Ask a doctor about a prescription for MIRCERA 150 micrograms/0.3 ml SOLUTION FOR INJECTION IN PRE-FILLED SYRINGE
Leaflet:information for the user
MIRCERA
30micrograms/0.3ml injectable solution in a pre-filled syringe
50micrograms/0.3ml injectable solution in a pre-filled syringe
75micrograms/0.3ml injectable solution in a pre-filled syringe
100micrograms/0.3ml injectable solution in a pre-filled syringe
120micrograms/0.3ml injectable solution in a pre-filled syringe
150micrograms/0.3ml injectable solution in a pre-filled syringe
200micrograms/0.3ml injectable solution in a pre-filled syringe
250micrograms/0.3ml injectable solution in a pre-filled syringe
360micrograms/0.6ml injectable solution in a pre-filled syringe
methoxy polyethylene glycol-epoetin beta
Read the entire leaflet carefully before starting to use this medicine, as it contains important information for you.
Contents of the leaflet:
You have been prescribed this medicine because you are suffering from anemia caused by chronic kidney disease. This anemia is associated with typical symptoms such as fatigue, weakness, and shortness of breath. This means you have very few red blood cells and your hemoglobin level is too low (your body tissues may not be receiving enough oxygen).
MIRCERA is indicated only for the treatment of symptomatic anemia caused by chronic kidney disease in adult and pediatric patients (from 3 months to less than 18 years of age) who are receiving maintenance treatment with an erythropoiesis-stimulating agent (ESA) after their hemoglobin levels have been stabilized with the previous ESA.
MIRCERA is a medicine obtained through genetic engineering. Like the natural hormone erythropoietin, MIRCERA increases the number of red blood cells and the hemoglobin level in the blood.
Do not use MIRCERA
Warnings and precautions
The safety and efficacy of MIRCERA treatment have not been established in other indications, including anemia in patients with cancer.
The safety and efficacy of MIRCERA treatment in pediatric patients have only been established in patients whose hemoglobin level has been previously stabilized with an ESA.
Before starting treatment with MIRCERA
If you are a patient with hepatitis C and are receiving interferon and ribavirin, you should discuss this with your doctor, as the combination of ESAs with interferon and ribavirin can lead to a loss of effect and, in exceptional cases, the development of PRCA, which is a severe anemia. ESAs are not approved for the treatment of anemia associated with hepatitis C.
During treatment with MIRCERA
Children and adolescents
MIRCERA can be used to treat children and adolescents (from 3 months to less than 18 years of age) with anemia associated with chronic kidney disease. They should be stabilized with maintenance ESA treatment before switching to MIRCERA and may or may not be receiving dialysis.
Ask your doctor, pharmacist, or nurse before administering this medicine if you or your child is under 18 years of age.
Be careful with other medicines that stimulate red blood cell production:MIRCERA is one of the agents that stimulate red blood cell production, like the human protein erythropoietin. Your doctor should always record the exact product you are using.
Severe skin reactions, such as Stevens-Johnson syndrome (SJS) and toxic epidermal necrolysis (TEN), have been observed with the administration of epoetins.
SJS/TEN may initially appear as red, circular patches or spots on the skin, often with central blisters on the trunk. Ulcers may also appear in the mouth, throat, nose, genitals, and eyes (irritation and swelling of the eyes). These severe skin reactions are often preceded by fever or flu-like symptoms. The skin reaction can progress to widespread skin peeling and potentially life-threatening complications.
If you experience a severe skin reaction or any of these other skin symptoms, stop taking Mircera and contact your doctor or seek medical attention immediately.
Using MIRCERA with other medicines
Tell your doctor or pharmacist if you are using, have recently used, or might use any other medicines.
No interaction studies have been performed. There is no evidence that MIRCERA interacts with other medicines.
Using MIRCERA with food and drinks
Food and drinks do not affect MIRCERA.
Pregnancy, breastfeeding, and fertility
Ask your doctor or pharmacist before using any medicine.
No studies have been conducted with MIRCERA in pregnant or breastfeeding women.
Tell your doctor if you are pregnant, think you may be pregnant, or plan to become pregnant. Your doctor will consider what is the best treatment for you during pregnancy.
Tell your doctor if you are breastfeeding or plan to breastfeed. Your doctor will advise you whether to stop or continue breastfeeding and whether to stop or continue your treatment.
MIRCERA has not shown any evidence of altering fertility in animals. The potential risk in humans is unknown.
Driving and using machines
MIRCERA does not affect your ability to drive or use machines.
Important information about some of the ingredients of MIRCERA
This medicine contains less than 1 mmol (23 mg) of sodium per ml; it is essentially "sodium-free".
Follow the instructions for administering this medicine exactly as indicated by your doctor. If you are in doubt, consult your doctor or pharmacist again.
Your doctor will use the lowest effective dose to control the symptoms of your anemia.
If you do not respond adequately to MIRCERA, your doctor will monitor your dose and inform you if you need to change the dose of MIRCERA.
Treatment with MIRCERA should be started under the supervision of a healthcare professional. The following injections can be administered by a healthcare professional or, once you have been taught, you can inject MIRCERA yourself. Children and adolescents under 18 years of age should not self-inject MIRCERA; administration should be performed by a healthcare professional or a trained adult caregiver. (Follow the instructions at the end of the leaflet on how to use the MIRCERA pre-filled syringe to administer an injection to yourself or another person).
MIRCERA can be injected under the skin in the abdomen, arm, or thigh, or into a vein. Your doctor will decide what is best for you.
Your doctor will perform regular blood tests and monitor your hemoglobin level to see how your anemia is responding to treatment.
Your doctor may increase or decrease your dose or temporarily interrupt your treatment to adjust your hemoglobin level to the appropriate level for you. Dose changes will not be made more frequently than once a month.
Your doctor may replace your current medicine with MIRCERA. Your doctor will decide whether to treat you with MIRCERA administered in a single injection once a month. Your doctor will calculate your initial dose of MIRCERA based on your previous medicine's last dose. The first dose of MIRCERA will be administered on the day your previous medicine's injection was scheduled.
Your doctor may increase or decrease your dose or temporarily interrupt your treatment to adjust your hemoglobin level to the appropriate level for you. Dose changes will not be made more frequently than once a month.
If you use more MIRCERA than you should
Tell your doctor or pharmacist if you use a higher dose of MIRCERA than you should, as you may need to have blood tests and interrupt your treatment.
If you forget to use MIRCERA
If you forget a dose of MIRCERA, administer the dose as soon as you remember and ask your doctor when to administer the next doses.
If you stop treatment with MIRCERA
Treatment with MIRCERA is usually long-term. However, it can be interrupted at any time if your doctor indicates so.
If you have any further questions about the use of this medicine, ask your doctor or pharmacist.
Like all medicines, this medicine can cause side effects, although not everybody gets them.
The frequency of possible side effects is listed below:
A common side effect (may affect up to 1 in 10 patients) is hypertension (high blood pressure).
Uncommon side effects (may affect up to 1 in 100 patients) are:
Rare side effects (may affect up to 1 in 1,000 patients) are:
If you experience these symptoms, please inform your doctor immediately to receive treatment.
During clinical trials, patients presented with a small decrease in platelet count in the blood. Cases of low platelet count (thrombocytopenia) have been reported in the post-marketing period.
Hypersensitivity reactions, including anaphylactic reactions and severe skin reactions such as Stevens-Johnson syndrome (SJS) and toxic epidermal necrolysis (TEN), have been observed with the administration of epoetins. These reactions can appear as red, circular patches or spots on the skin, often with central blisters on the trunk, skin peeling, and ulcers in the mouth, throat, nose, genitals, and eyes, and may be preceded by fever and flu-like symptoms. Stop using Mircera if you experience these symptoms and contact your doctor or seek medical attention immediately. See also section 2.
As with other ESAs, cases of thrombosis, including pulmonary embolism, have been reported in the post-marketing period.
In some patients treated with ESAs, including MIRCERA, a disease called pure red cell aplasia (PRCA, a reduction or cessation of red blood cell production) has been observed due to the presence of anti-erythropoietin antibodies.
Reporting of side effects
If you experience any side effects, ask your doctor or pharmacist, even if they are not listed in this leaflet. You can also report them directly through the national reporting system included in Appendix V. By reporting side effects, you can help provide more information on the safety of this medicine.
Keep this medicine out of the sight and reach of children.
Do not use MIRCERA after the expiration date stated on the carton and on the label of the pre-filled syringe after "EXP". The expiration date is the last day of the month indicated.
Store in a refrigerator (between 2°C – 8°C). Do not freeze.
Keep the pre-filled syringe in the outer packaging to protect it from light.
You can take the MIRCERA pre-filled syringe out of the refrigerator and store it at room temperature, never above 30°C, for a single period of one month. During this period, you cannot return MIRCERA to the refrigerator before use. Once you have taken the medicine out of the refrigerator, you must use it within that month.
Only inject solutions that are transparent, colorless to slightly yellowish, and free from visible particles.
Medicines should not be disposed of via wastewater or household waste.
Ask your pharmacist how to dispose of the packaging and any unused medicine. This will help protect the environment.
Composition of MIRCERA
Appearance of the Product and Container Contents
MIRCERA is an injectable solution in a pre-filled syringe.
Clear to slightly yellowish solution without visible particles.
MIRCERA is presented in pre-filled syringes with a laminated piston and a protector with a 27 G1/2 needle. Each pre-filled syringe contains 0.3 ml or 0.6 ml of solution. The pre-filled syringes are not designed for partial dose administration. MIRCERA is available, for all doses, in packs of 1 and also in packs of 3 for the 30, 50, 75 microgram/0.3 ml doses. Only some pack sizes may be marketed.
Marketing Authorization Holder and Manufacturer
Roche Registration GmbH
Emil-Barell-Strasse 1
79639 Grenzach-Wyhlen
Germany
Manufacturer
Roche Pharma AG
Emil-Barell-Strasse 1
79639 Grenzach-Wyhlen
Germany
You can request more information about this medicinal product by contacting the local representative of the marketing authorization holder:
|
Czech Republic Roche s.r.o. Tel: +420 - 2 20382111 | Hungary Roche (Hungary) Kft. Tel: +36 - 1 279 4500 |
Denmark Roche Pharmaceuticals A/S Tel: +45 - 36 39 99 99 | Malta (See Ireland) |
Germany Roche Pharma AG Tel: +49 (0) 7624 140 | Netherlands Roche Nederland B.V. Tel: +31 (0) 348 438050 |
Estonia Roche Eesti OÜ Tel: +372 - 6 177 380 | Norway Roche Norge AS Tel: +47 - 22 78 90 00 |
Greece Roche (Hellas) A.E. Tel: +30 210 61 66 100 | Austria Roche Austria GmbH Tel: +43 (0) 1 27739 |
Spain Roche Farma S.A. Tel: +34 - 91 324 81 00 | Poland Roche Polska Sp.z o.o. Tel: +48 - 22 345 18 88 |
France Roche Tel: +33 (0)1 47 61 40 00 | Portugal Roche Farmacêutica Química, Lda Tel: +351 - 21 425 70 00 |
Croatia Roche d.o.o. Tel: +385 1 47 22 333 | Romania Roche România S.R.L. Tel: +40 21 206 47 01 |
Ireland Roche Products (Ireland) Ltd. Tel: +353 (0) 1 469 0700 | Slovenia Roche farmacevtska družba d.o.o. Tel: +386 - 1 360 26 00 |
Iceland Roche Pharmaceuticals A/S c/o Icepharma hf Tel: +354 540 8000 | Slovak Republic Roche Slovensko, s.r.o. Tel: +421 - 2 52638201 |
Italy Roche S.p.A. Tel: +39 - 039 2471 | Finland Roche Oy Tel: +358 (0) 10 554 500 |
Cyprus Γ.Α.Σταμ?της & Σια Λτδ. Tel: +357 - 22 76 62 76 | Sweden Roche AB Tel: +46 (0) 8 726 1200 |
Latvia Roche Latvija SIA Tel: +371 - 6 7039831 | United Kingdom(Northern Ireland) Roche Products (Ireland) Ltd. Tel: +44 (0) 1707 366000 |
Date of Last Revision of this Leaflet:
Detailed information on this medicinal product is available on the European Medicines Agency website http://www.ema.europa.eu/.
MIRCERA Pre-filled Syringe Instructions for Use |
The following instructions explain how to use MIRCERA pre-filled syringes so that you or another person can administer an injection. It is important that you read and follow these instructions carefully so that you can use the pre-filled syringe correctly and safely. Do notattempt to administer an injection until you are sure you understand how to use the pre-filled syringe. If in doubt, consult a healthcare professional. Children and adolescents under 18 years of age must notself-inject MIRCERA; administration should be performed by a healthcare professional or a trained adult caregiver. Always follow the instructions in these Instructions for Use, as they may differ from your experience. These instructions will help you prevent incorrect treatment or risks such as needlestick injuries or early activation of the needle safety device, or problems related to needle placement. |
IMPORTANT INFORMATION
? Use MIRCERA pre-filled syringe only if you have been prescribed this medication.
? Read the packaging and make sure you have the dose prescribed by your doctor.
? Do not useMIRCERA if the syringe, needle, box, or plastic tray containing the syringe appears to be damaged.
? Do not touchthe activation protectors (see Figure A), as this may damage the syringe and render it unusable.
? Do not usethe syringe if the contents are cloudy, whitish, or contain particles.
? Never attempt to disassemble the syringe.
? Never throw or handle the syringe by the plunger.
? Do not removethe needle protector until you are ready to administer the injection.
? Do not ingestthe medication from the syringe.
? Do not injectthrough clothing.
? Do notreuse or re-sterilize the syringe or needle.
? Pre-filled syringes are not designed to administer partial doses.
? Keep the syringe, needle, and supplies out of the reach of children.
STORAGE
Keep the pre-filled syringe, needle, andcontainer for disposal of sharp objectsout of the reach of children.
Store the syringe and needle in their original packaging until the time of use.
Always store the syringe and needle in the refrigerator at a temperature of 2 – 8 ºC (35.6 - 46.4°F).
Do notallow the medication to freeze, and protect the medication and needle from light. Keep the syringe and needle in a dry place.
MATERIALS INCLUDED IN THE PACKAGE (Figure A):

Figure A
MATERIALS NOT INCLUDED IN THE PACKAGE (Figure B):
Alcohol swabs | Sterile cotton or gauze | Containers for disposal of sharp objects for safe disposal of used needles and syringes |

Figure B
Place all the items you need for an injection on a flat, clean, and well-lit surface, such as a table.
HOW TO ADMINISTER THE INJECTION | |
Step 1: Allow the syringe to reach room temperature | |
Figure C | Carefully remove the MIRCERA pre-filled syringe package from the refrigerator. Keep the syringe and needle inside the package, protected from light, and let it reach room temperature for at least 30 minutes (Figure C). ? If the medication is not allowed to reach room temperature, the injection may be uncomfortable and may make it difficult to push the plunger. ? Do notheat the syringe in any other way. |
Figure D | Open the box and remove the plastic tray containing the MIRCERA pre-filled syringe from the package without removing the protective film (Figure D). |
Step 2: Wash your hands | ||
| ||
Step 3: Remove the pre-filled syringe and inspect it visually | ||
Figure F | Remove the protective film from the plastic tray and remove the packaged needle and syringe by holding the syringe by the middle of the body without touching the activation protectors (Figure F). ? Only handle the syringe by the body, as contact with the activation protectors can cause premature release of the safety device. |
Figure G | Examine the syringe for damage and check the expiration date indicated on the syringe and package. This is important to ensure that the syringe and medication are safe to use (Figure G). Do notuse the syringe if: ? It has been accidentally dropped. ? Any part of the syringe appears to be damaged. ? The contents are cloudy, whitish, or contain particles.
? The expiration date has passed. |
Step 4: Attach the needle to the syringe
Figure H | Hold the syringe firmly by the middle and the rubber cap at the tip, and remove the rubber cap from the syringe (fold and pull) (Figure H).
? Do not touchthe activation protectors. ? Do not pushthe plunger. ? Do not pullthe plunger. |
Figure I | Hold the packaged needle firmly with both hands and check if the packaged needle is damaged. Break the seal of the needle using a twisting motion and remove the needle cap as indicated in the illustration (Figure I). Immediately discard the needle cap in the container for disposal of sharp objects. Do not removethe needle protector that performs this function. Do not use the needle if:
|
Figure J | Attach the needle to the syringe, pushing it firmly until it clicks and twisting or turning it slightly (Figure J). |
Step 5: Remove the syringe protector and prepare for injection | |
Figure K | Hold the syringe firmly with one hand by the middle of the body and pull the syringe protector with the other hand. Discard the syringe protector in the container for disposal of sharp objects (Figure K).
|
Figure L | To remove air bubbles from the pre-filled syringe, hold the syringe with the needle facing up. Gently tap the syringe to make the bubbles rise (Figures L and M). |
Figure M | Slowly push the plunger to remove all the air, as instructed by your healthcare professional (Figure M). |
Step 6: Administer the injection There are two different ways (routes) to inject MIRCERA into your body. Follow the recommendations given by your healthcare professional on how to inject MIRCERA. | |
Subcutaneous route: If you have been advised to inject MIRCERA under the skin, administer the dose as described below. | |
Figure N | Choose one of the recommended injection sites indicated. You can inject MIRCERA into the upper arm, thigh, or abdomen, except for the area around the navel (Figure N). The back of the upper arm is not a recommended injection site for self-injection. Use this injection site only if you are administering the injection to another person. When selecting an injection site: ? Choose a different injection site each time you administer an injection, at a distance of at least three centimeters from the area where you administered the previous injection. ? Do notinject into areas that may be irritated by a belt or the waistband of your clothing. ? Do notinject into moles, scars, bruises, or areas where the skin is sensitive, red, hard, or damaged. |
Figure O | Clean the chosen injection site with an alcohol swab to reduce the risk of infection; carefully follow the instructions on the alcohol swab (Figure O). ? Let the skin dry for about 10 seconds. ? Make sure notto touch the cleaned area before injection and do not blow on it. ? Immediately discard the alcohol swab. |
Figure P | Assume a comfortable position before administering the MIRCERA injection. To ensure that the needle can be inserted correctly into the skin, pinch a fold of skin at the injection site with your free hand. It is essential to pinch your skin to ensure that you inject under the skin (into fatty tissue) but not deeper (into muscle). If the injection is administered into the muscle, it may be uncomfortable (Figure P). Carefully insert the needle completely into the skin at a 90° angle, making a quick motion as if throwing a dart. Then, hold the syringe in place and stop pinching the skin. Do notmove the needle while it is inserted into the skin. Once the needle is completely inserted into the skin, slowly push the plunger with your thumb and against the grips until all the medication is injected while holding the syringe with your index and middle fingers. The plunger rod should be completely down (pressed) and you should hear a "click" that indicates the activation of the needle safety device (Figure Q). |
| Do notrelease the plunger before completing the injection or before pressing the plunger completely. Remove the syringe from the skin, WITHOUTreleasing the plunger (Figure R). |
Figure R | Release the plunger, allowing the needle safety device of the syringe to protect the needle (Figure S). |
Figure S |
Plunger retracted showing the transparent liquid medication and the retracted safety mechanism"> Figure T | You can now remove the peel-off label if necessary (Figure T). | |||
After injection: ? Place a sterile cotton ball or gauze over the injection site and press for several seconds. ? Discard the cotton ball or gauze immediately after use. ? Do notrub the injection site with a dirty hand or cloth. ? If necessary, you can cover the injection site with a small bandage. Discard the syringe: ? Do notattempt to put the protector back on the needle. ? Do notreuse or re-sterilize the syringe and/or needle. ? Do notthrow the used syringe with the needle in the household trash. ? Throw away used syringes in a sharps disposal container and/or according to the regulations of the health authorities. ? Discard the full sharps disposal container. INTRAVENOUS ROUTE: If the healthcare professional has recommended that you inject MIRCERA into a vein, you must follow the process described below. After preparing the syringe according to the description of steps 1 to 5: Clean the venous port of the dialysis tube with an alcohol swab as indicated by the supplier or manufacturer. Discard the alcohol swab immediately after use.
Step 7: Discard the used syringe with the needle | ||||
| ||||
The best alternatives with the same active ingredient and therapeutic effect.
Discuss dosage, side effects, interactions, contraindications, and prescription renewal for MIRCERA 150 micrograms/0.3 ml SOLUTION FOR INJECTION IN PRE-FILLED SYRINGE – subject to medical assessment and local rules.