PYLCLARI 1000 MBq/mL Injectable Solution
How to use PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTION
Translated with AI
This page provides general information and does not replace a doctor’s consultation. Always consult a doctor before taking any medication. Seek urgent medical care if symptoms are severe.
Show originalContents of the leaflet
Introduction
Package Leaflet: Information for the Patient
Pylclari 1,000 MBq/ml Solution for Injection
Pylclari 1,500 MBq/ml Solution for Injection
piflufolastat (18F)
This medicinal product is subject to additional monitoring, which will allow for the quick identification of new safety information. You can help by reporting any side effects you may get. The last section of this leaflet includes information on how to report side effects.
Read all of this leaflet carefully before you start using this medicine because it contains important information for you.
- Keep this leaflet, you may need to read it again.
- If you have any further questions, ask your nuclear medicine doctor, who will be supervising the procedure.
- If you get any side effects, talk to your nuclear medicine doctor, even if they are not listed in this leaflet. See section 4.
Contents of the Package Leaflet
- What is Pylclari and what is it used for
- What you need to know before you are given Pylclari
- How Pylclari is given
- Possible side effects
- Storage of Pylclari
- Contents of the pack and other information
1. What is Pylclari and what is it used for
This medicinal product is a radiopharmaceutical for diagnostic use only.
Pylclari contains the active substance piflufolastat (18F), which contains radioactive fluorine (18F). It is given so that doctors can perform a special type of scan called positron emission tomography (PET) to detect specific types of cancer cells with a protein called prostate-specific membrane antigen (PSMA). This medicinal product is used in patients:
- with prostate cancer who have a high risk of the disease spreading to other parts of the body and who are suitable for treatment that may cure the cancer
- who have received previous treatment for prostate cancer and in whom the cancer is suspected to have come back based on the results of other tests (e.g., prostate-specific antigen, PSA).
The PET scan with Pylclari may help your doctor locate where the disease is.
You should discuss the results of the test with the doctor who requested the scan.
The use of Pylclari involves exposure to small amounts of radioactivity. Your doctor and the nuclear medicine doctor have considered that the clinical benefit you will get from the procedure with the radiopharmaceutical outweighs the risk of being exposed to radiation.
2. What you need to know before you are given Pylclari
You should not be given Pylclari
If you are allergic to piflufolastat (18F) or any of the other ingredients of this medicinal product (listed in section 6).
Warnings and precautions
Be careful with Pylclari
- if you have kidney problems
- if you are on a low-sodium diet (see section 2 "Pylclari contains sodium").
Before Pylclari is given to you, you should
Drink plenty of water before starting the examination to urinate as often as possible during the first few hours after the examination.
Children and adolescents
This medicinal product is not intended for use in children and adolescents.
Other medicines and Pylclari
Tell your nuclear medicine doctor if you are taking, have recently taken, or might take any other medicines, such as hormone therapy to treat your prostate cancer, as they may interfere with the interpretation of the images by the doctor.
Pregnancy and breast-feeding
This medicinal product is not intended for use in women.
Driving and using machines
It is considered unlikely that this medicinal product will affect your ability to drive and use machines.
Pylclari contains alcohol (ethanol)
This medicinal product contains up to 900 mg of alcohol per administration, which is equivalent to less than 23 ml of beer or 11 ml of wine. The small amount of alcohol in this medicinal product will not have any noticeable effect.
Pylclari contains sodium
This medicinal product contains up to 35 mg of sodium (main component of cooking/table salt) per dose. This is equivalent to 2% of the maximum recommended daily intake of sodium for an adult.
3. How Pylclari is given
There are strict laws on the use, handling, and disposal of radiopharmaceuticals. Pylclari should only be used in special controlled areas. Only personnel with training and experience in the safe use of this product will be able to handle and administer it. These people will take the necessary precautions to use this medicinal product safely and will keep you informed of their actions.
Dosage
The nuclear medicine specialist supervising the procedure will decide on the amount of this medicinal product to be used in your case. It will be the smallest amount necessary to obtain the desired information. The recommended average dose is 4 MBq/kg body weight; this is approximately 280 megabecquerel for a 70 kg adult (MBq, unit used to express radioactivity).
Administration of Pylclari and performance of the procedure
- This medicinal product will be given as a single injection into a vein in your arm.
- A single injection is sufficient to perform the test that your doctor needs to do.
Duration of the procedure
Your nuclear medicine doctor will inform you of the usual duration of the procedure.
The scan will usually start between 90 and 120 minutes after the injection of Pylclari.
After Pylclari is given to you, you should:
- avoid close contact with small children and pregnant women for 12 hours after the injection
- drink plenty of water to urinate frequently to eliminate the medicinal product from your body.
Your nuclear medicine doctor will inform you if you need to take special precautions after this medicinal product is given to you. If you have any doubts, ask your nuclear medicine doctor.
If you have been given more Pylclari than you should
Since this product is administered by a doctor in strictly controlled conditions, it is unlikely that you will receive an overdose.
However, in case of overdose, you will receive the appropriate treatment. The nuclear medicine doctor in charge of the procedure may offer you methods to increase diuresis to help you eliminate the medicinal product from your body.
If you have any further questions on the use of Pylclari, ask your nuclear medicine doctor who is supervising the procedure.
4. Possible side effects
Like all medicines, this medicine can cause side effects, although not everybody gets them.
Common(may affect up to 1 in 10 people):
- dysgeusia (alteration of taste in the mouth),
- headache.
Uncommon(may affect up to 1 in 100 people):
- hypersensitivity (allergic reactions),
- dehydration (when the body loses too much water and other fluids it needs to function normally),
- confusion about time and space,
- fatigue,
- dizziness,
- increased sensitivity or increased response to pain from stimuli such as light touch or sound,
- migraine,
- vertigo (feeling of dizziness),
- muscle weakness,
- visual field defect,
- dry skin,
- rash,
- joint pain,
- limb pain,
- dysuria (problems urinating),
- chest discomfort,
- rash at the injection site,
- abnormal sensation,
- pain at the injection site.
Frequency not known(cannot be estimated from the available data):
- Fainting
- nausea (discomfort)
- vomiting
This radiopharmaceutical product emits low levels of ionizing radiation associated with a minor risk of cancer and genetic abnormalities.
Reporting of side effects
If you experience any side effects, talk to your nuclear medicine doctor, even if they are not listed in this leaflet. You can also report side effects directly through the national reporting system listed in Appendix V.
By reporting side effects, you can help provide more information on the safety of this medicine.
5. Storage of Pylclari
You will not need to store this medicinal product. This medicinal product is stored under the responsibility of the specialist in suitable premises. The storage of radiopharmaceuticals will be carried out in accordance with national regulations on radioactive materials.
The following information is intended only for the specialist.
Do not use Pylclari after the expiry date stated on the label after "EXP".
6. Contents of the pack and other information
Composition of Pylclari
- The active substance is piflufolastat (18F). Each ml of solution contains 1,000 MBq or 1,500 MBq of Pylclari at the date and time of calibration.
- The other ingredients are ethanol, 9 mg/ml of sodium chloride (0.9%) injection solution, and sodium ascorbate. Please see section 2 "Pylclari contains sodium and ethanol".
Appearance of Pylclari and contents of the pack
Pylclari is a clear and colorless solution presented in a glass vial.
Each multidose vial contains 0.5 to 10 ml of solution, corresponding to 500 to 15,000 MBq at the date and time of calibration.
Marketing authorisation holder
CURIUM PET FRANCE
3 rue Marie Curie, Biopole Clermont-Limagne
63 360 Saint-Beauzire - France
Manufacturers
CURIUM PET FRANCE 10 AVENUE CHARLES PEGUY 95200 SARCELLES - FRANCE | CURIUM FINLAND Oy Saukonpaadenranta 2 Helsinki, 00180 - Finland |
CURIUM PET FRANCE CHU XAVIER ARNOZAN AVENUE DU HAUT LEVEQUE 33604 PESSAC- FRANCE | Curium pharma Spain, S.A. C/ Manuel Bartolomé Cossio, 10 E-28040 MADRID - SPAIN |
CURIUM PET FRANCE 136 IMPASSE DES QUATRE MOLLARDS 38280 JANNEYRIAS - FRANCE | Curium pharma Spain, S.A. Thomas ALVA Edison, 7 41092 SEVILLA - Spain |
Curium Italy S.r.l. Via GIUSEPPE Ripamonti, 435, Milano, 20141 - Italy | SYN Innovation Laboratories Sousaki site AG. Theodoroi, Korinthia Prefectura 20003 - Greece |
CURIUM AUSTRIA GMBH SEILERSTÄTTE 4 LINZ, 4020, - AUSTRIA | CURIUM PET France 3 rue Marie Curie, Biopole Clermont-Limagne 63 360 Saint-Beauzire – France |
Curium PET FRANCE Technopôle de Château Gombert Rue Louis Leprince Ringuet 13013 Marseille - France | Curium PET FRANCE CHU de Brabois 4 rue du Morvan 54500 Vandœuvre-lès-Nancy Cedex - France |
CYCLOTRON VU Van der Boechorststraat 6a Amsterdam, 1081 BT - Netherlands Istituto Di Fisiologia Clinica Del Cnr Via Giuseppe Moruzzi, 1, PISA 56124 – Italy Curium pharma Spain, S.A. Pol. Ind. Conpisa, C/Veguillas, 2 Nave 16 28864 Ajalvir – Spain | CURIUM PET FRANCE 1-3 RUE GERMAINE RICHIER 37100 TOURS – FRANCE Curium Italy S.r.l. Tor Vergata, Viale Oxford, 81, Rome 00133 – Italy CURIUM PET FRANCE AVENUE DE LA BATAILLE FLANDRES DUNKERQUE 35000 RENNES – FRANCE |
Date of last revision of this leaflet:
Other sources of information
Detailed information on this medicinal product is available on the European Medicines Agency website: http://www.ema.europa.eu
On the European Medicines Agency website, you can find this leaflet in all languages of the European Union/European Economic Area.
--------------------------------------------------------------------------------------------------------------
This information is intended only for healthcare professionals:
The full summary of product characteristics of Pylclari is included as a separate document in the product packaging, with the aim of providing healthcare professionals with additional scientific and practical information on the administration and use of this radiopharmaceutical.
Refer to the summary of product characteristics.
- Country of registration
- Dosage formINJECTABLE, 1000 MBq/ml
- ATC codeV09IX16
- Active substance
- Prescription requiredYes
- Manufacturer
- CompositionETANOL ANHIDRO (4-90 mg/ml mg), CLORURO DE SODIO (c.s.p. 1 ml mg), ASCORBATO DE SODIO (0,02-1,2 mg/ml mg)
- This information is for reference only and does not constitute medical advice. Always consult a doctor before taking any medication. Oladoctor is not responsible for medical decisions based on this content.
- Alternatives to PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTIONDosage form: INJECTABLE, 1.500 MBq/mlActive substance: piflufolastat (18F)Manufacturer: Curium Pet FrancePrescription requiredDosage form: INJECTABLE, 74 MBq iobenguane (123I)Active substance: iobenguane (123I)Manufacturer: Ge Healthcare Bio-Sciences, S.A.U.Prescription requiredDosage form: INJECTABLE, 1600 MBq/mlActive substance: fluciclovine (18F)Manufacturer: Blue Earth Diagnostics Ireland LimitedPrescription required
Online doctors for PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTION
Discuss questions about PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTION, including use, safety considerations and prescription review, subject to medical assessment and local regulations.
Get PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTION Prescription Online
Fill in a 2-min form
Tell us your symptoms, history, and what medicine you're requesting.
Pick a doctor or let us assign
Choose a specialist or we'll match you with the next available doctor.
Doctor reviews your case
Usually within 30 minutes. They may ask follow-up questions via chat.
Collect from any pharmacy
Electronic prescription sent to your email — valid across Spain.
Frequently Asked Questions
Is a prescription required for PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTION?
PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTION requires a prescription in Spain. You can check with a doctor online whether this medicine may be appropriate for your situation.
What is the active substance in PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTION?
The active ingredient in PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTION is piflufolastat (18F). This information helps identify medicines with the same composition but different brand names.
Who manufactures PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTION?
PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTION is manufactured by Curium Pet France. Pharmacy brands and packaging may differ depending on the distributor.
Which doctors can assess the use of PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTION online?
Doctors such as Family doctors, Psychiatrists, Dermatologists, Cardiologists, Endocrinologists, Gastroenterologists, Pulmonologists, Nephrologists, Rheumatologists, Hematologists, Infectious disease physicians, Allergists, Geriatricians, Paediatricians, Oncologists may assess whether PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTION is appropriate, depending on your situation and local regulations. You can book an online consultation to discuss your symptoms and possible next steps.
How to buy PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTION in Spain?
Spain has a well-developed healthcare infrastructure across major cities such as Madrid, Barcelona, Valencia, and Seville. Pharmacies are widely available and operate under strict regulations, ensuring access to prescribed medications.
You can buy PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTION in Madrid, Barcelona, Seville, or Valencia at any local pharmacy with a valid prescription.
To obtain a prescription, you can use Oladoctor:
What are the alternatives to PYLCLARI 1.000 MBq/mL INJECTABLE SOLUTION?
Other medicines with the same active substance (piflufolastat (18F)) include PYLCLARI 1.500 MBq/mL INJECTABLE SOLUTION, ADREVIEW 74 MBq/ml INJECTABLE SOLUTION, AXUMIN 1600 MBq/ML INJECTABLE SOLUTION. These may have different brand names or formulations but contain the same therapeutic ingredient. Always consult a doctor before switching or starting a new medicine.
