This page is for general information. Consult a doctor for personal advice. Call emergency services if symptoms are severe.

How to use ALPROLIX 1,000 IU POWDER AND SOLVENT FOR INJECTABLE SOLUTION

Introduction

Package Leaflet: Information for the User

ALPROLIX 250UI powder and solvent for solution for injection

ALPROLIX 500UI powder and solvent for solution for injection

ALPROLIX 1000UI powder and solvent for solution for injection

ALPROLIX 2000UI powder and solvent for solution for injection

ALPROLIX 3000UI powder and solvent for solution for injection

eftrenonacog alfa recombinant coagulation factor IX, Fc fusion protein

Read all of this leaflet carefully before you start using this medicine because it contains important information for you.

Keep this leaflet, you may need to read it again.
If you have any further questions, ask your doctor, pharmacist, or nurse.
This medicine has been prescribed for you only. Do not pass it on to others. It may harm them, even if their signs of illness are the same as yours.
If you get any side effects, talk to your doctor, pharmacist, or nurse. This includes any possible side effects not listed in this leaflet. See section 4.

Contents of the pack

What is ALPROLIX and what is it used for
What you need to know before you use ALPROLIX
How to use ALPROLIX
Possible side effects
Storage of ALPROLIX
Contents of the pack and further information
Instructions for preparation and administration

1. What is ALPROLIX and what is it used for

ALPROLIX contains the active substance eftrenonacog alfa, a recombinant coagulation factor IX, Fc fusion protein. Factor IX is a protein that is naturally produced by the body and is necessary for blood to form clots and stop bleeding.

ALPROLIX is a medicine used to treat and prevent bleeding in patients of all ages with hemophilia B (a hereditary bleeding disorder caused by a deficiency of factor IX).

ALPROLIX is prepared using recombinant technology without the addition of any human or animal component in the manufacturing process.

How ALPROLIX works

In patients with hemophilia B, factor IX is missing or does not work properly. This medicine is used to replace the missing or deficient factor IX. ALPROLIX increases factor IX concentrations in the blood and temporarily corrects the tendency to bleed. The Fc fusion protein in this medicine prolongs the duration of action of the medicine.

2. What you need to know before you use ALPROLIX

Do not use ALPROLIX

if you are allergic to eftrenonacog alfa or any of the other ingredients of this medicine (listed in section 6).

Warnings and precautions

Talk to your doctor, pharmacist, or nurse before you start using ALPROLIX.

There is a small chance that you may have a severe allergic reaction (anaphylactic reaction) to ALPROLIX. Signs of allergic reactions include generalized itching, hives, tightness in the chest, difficulty breathing, and low blood pressure. If you experience any of these symptoms, stop the injection immediately and contact your doctor. Due to the risk of allergic reactions with factor IX, your first administrations of ALPROLIX should be performed under medical observation in a place where adequate medical care can be provided in case of allergic reactions.

Talk to your doctor if you think you are not getting control of bleeding with the dose you are receiving, as there may be several reasons for this. For example, the formation of antibodies (also known as inhibitors) against factor IX is a known complication that can occur during the treatment of hemophilia B. Antibodies prevent the treatment from working properly. Your doctor will check if this is the case. Do not increase the total dose of ALPROLIX to control bleeding without talking to your doctor first.

Patient with a factor IX inhibitor may have a higher risk of anaphylaxis during future treatments with factor IX. Therefore, if you experience allergic reactions such as those described above, you should be tested for the presence of an inhibitor.

Factor IX medicines may increase the risk of unwanted blood clots in your body, especially if you have risk factors for developing blood clots. Symptoms of a possible unwanted blood clot may include: pain and/or tenderness along a vein, unexpected swelling of an arm or leg, or sudden shortness of breath or difficulty breathing.

Cardiovascular disorders

If you have been told that you have a heart condition or are at risk of having one, be extra careful when using factor IX and talk to your doctor.

Catheter-related complications

If you need a central venous access device (CVAD), you should be aware of the risk of CVAD-related complications, including local infections, bacteria in the blood, and blood clots at the catheter insertion site.

Documentation

We strongly recommend that every time ALPROLIX is administered, the name and batch number of the product are recorded.

Other medicines and ALPROLIX

Tell your doctor or pharmacist if you are using, have recently used, or might use any other medicines.

Pregnancy and breastfeeding

If you are pregnant or breastfeeding, think you may be pregnant, or are planning to have a baby, ask your doctor or pharmacist for advice before using this medicine.

Driving and using machines

ALPROLIX has no influence on the ability to drive and use machines.

ALPROLIX contains sodium

This medicine contains less than 1 mmol of sodium (23 mg) per vial, i.e., it is essentially “sodium-free”. In case of treatment with several vials, the total sodium content should be taken into account.

3. How to use ALPROLIX

Treatment with ALPROLIX will be started by a doctor who is experienced in the care of patients with hemophilia. Follow exactly the administration instructions of this medicine given by your doctor (see section 7). If you are unsure, talk to your doctor, pharmacist, or nurse.

ALPROLIX is given by injection into a vein. You or another person can administer it after receiving the necessary training. Your doctor will decide the dose (in International Units or “IU”) that you will receive. The dose will depend on your individual needs for factor IX replacement treatment and whether it is used for prevention or treatment of bleeding. Talk to your doctor if you think you are not getting control of bleeding with the dose you are receiving.

How often you will need an injection will depend on how well the medicine is working for you. Your doctor will perform the relevant laboratory tests to ensure that you have adequate factor IX concentrations in the blood.

Treatment of bleeding

The dose of ALPROLIX is calculated based on your body weight and the desired factor IX concentrations. The target factor IX concentrations depend on the severity and location of the bleeding.

Prevention of bleeding

If you are using ALPROLIX to prevent bleeding, your doctor will calculate the dose.

The usual dose of ALPROLIX is 50 IU per kilogram of body weight, administered once a week, or 100 IU per kilogram of body weight, administered once every 10 days. Your doctor may adjust the dose or interval. In some cases, especially in younger patients, shorter dosing intervals or higher doses may be necessary.

Use in children and adolescents

ALPROLIX can be used in children and adolescents of all ages. In children under 12 years, higher doses or more frequent injections may be necessary, and the usual dose is 50 to 60 IU per kilogram of body weight, administered once every 7 days.

If you use more ALPROLIX than you should

Tell your doctor as soon as possible. Follow exactly the administration instructions of ALPROLIX given by your doctor. If you are unsure, talk to your doctor, pharmacist, or nurse.

If you forget to use ALPROLIX

Do not take a double dose to make up for forgotten doses. Take your dose as soon as you remember and then continue with your normal dosing schedule. If you are unsure, talk to your doctor, pharmacist, or nurse.

If you stop using ALPROLIX

Do not stop using ALPROLIX without talking to your doctor. If you stop using ALPROLIX, you may no longer be protected against bleeding or an existing bleed may not stop.

If you have any further questions on the use of this medicine, ask your doctor, pharmacist, or nurse.

4. Possible side effects

Like all medicines, this medicine can cause side effects, although not everybody gets them.

If a severe allergic reaction (anaphylactic reaction) occurs, the injection should be stopped immediately. You should contact your doctor immediately if you experience any of the following symptoms of allergic reactions: swelling of the face, rash, generalized itching, hives, tightness in the chest, difficulty breathing, and low blood pressure.

In children who have not received previous treatment with factor IX-containing medicines, it is common for inhibitors to form (in up to 1 in 10 patients) (see section 2). If this happens, the medicine may stop working properly, and your child may experience persistent bleeding. If this happens, you should contact your doctor immediately.

The following side effects may occur with this medicine.

Common side effects (may affect up to 1 in 10 people):headache, numbness or tingling in the mouth, pain in the side with blood in the urine (obstructive uropathy), and redness at the injection site.

Children who have not received previous treatment with factor IX-containing medicines: factor IX inhibitors, hypersensitivity.

Uncommon side effects (may affect up to 1 in 100 people):dizziness, altered taste, bad breath, feeling tired, pain at the injection site, rapid heartbeat, blood in the urine (hematuria), pain in the side (renal colic), low blood pressure, and decreased appetite.

Rare side effects (frequency cannot be estimated from the available data):severe allergic reaction and potentially life-threatening allergic reaction (anaphylactic shock).

Reporting of side effects

If you experience any side effects, talk to your doctor, pharmacist, or nurse, even if it is possible that they are not listed in this leaflet. You can also report side effects directly through the national reporting system listed in Appendix V. By reporting side effects, you can help provide more information on the safety of this medicine.

5. Storage of ALPROLIX

Keep this medicine out of the sight and reach of children.

Do not use this medicine after the expiry date which is stated on the carton and on the label of the vial after “EXP”. The expiry date refers to the last day of the month stated. Do not use this medicine if it has been stored at room temperature for more than 6 months.

Store in a refrigerator (between 2°C - 8°C). Do not freeze. Keep the vial in the outer carton in order to protect from light.

Alternatively, ALPROLIX can be stored at room temperature (up to 30°C) for a single period not exceeding 6 months. Record the date when you removed ALPROLIX from the refrigerator and stored it at room temperature on the carton. After storage at room temperature, the medicine should not be put back in the refrigerator.

Once you have prepared ALPROLIX, you should use it immediately. If you cannot use the prepared solution immediately, you should use it within 6 hours if it has been stored at room temperature. Do not refrigerate the solution after preparation. Protect the solution from direct sunlight.

The prepared solution should be clear to slightly pearlescent (opalescent) and colorless. Do not use this medicine if you notice that it is cloudy or contains visible particles.

This medicine is for single use only.

Dispose of any unused solution properly. Medicines should not be disposed of via wastewater or household waste. Ask your pharmacist how to dispose of medicines no longer required. This will help protect the environment.

6. Container Contents and Additional Information

ALPROLIX Composition

Powder:

The active ingredient is eftrenonacog alfa (recombinant coagulation factor IX, Fc fusion protein). Each vial of ALPROLIX contains nominally 250, 500, 1,000, 2,000, or 3,000 IU of eftrenonacog alfa.
The other components are sucrose, L-histidine, mannitol, polysorbate 20, sodium hydroxide, and hydrochloric acid. See section 2 if you are on a low-sodium diet.

Solvent:

5 ml of sodium chloride and water for injections

Product Appearance and Container Contents

ALPROLIX is presented as a powder and solvent for solution for injection. The powder is a white to off-white powder or cake. The solvent supplied for the preparation of the solution is a clear and colorless solution. After preparation, the solution is clear to slightly opalescent and colorless.

Each ALPROLIX container contains 1 vial of powder, 5 ml of solvent in a prefilled syringe, 1 plunger rod, 1 vial adapter, 1 infusion set, 2 alcohol swabs, 2 bandages, and 1 gauze.

Marketing Authorization Holder and Manufacturer

Swedish Orphan Biovitrum AB (publ)

SE-112 76 Stockholm

Sweden

Phone: +46 8 697 20 00

Date of Last Revision of this Leaflet: 01/2024

Detailed information on this medicinal product is available on the European Medicines Agency website: http://www.ema.europa.eu. There are also links to other websites on rare diseases and orphan medicines.

Turn the leaflet over to read section 7. Preparation and Administration Instructions

Preparation and Administration Instructions

The following procedure describes the preparation and administration of ALPROLIX.

ALPROLIX is administered by intravenous (IV) injection after dissolving the injectable powder with the solvent supplied in the prefilled syringe. The ALPROLIX container contains:

Vial with stopper, prefilled syringe, cartridge with needle, filter, and tray with plunger, gauzes, and alcohol swabs Vial of powder, prefilled syringe with solvent, plunger, adapter, infusion set, alcohol swabs, bandages, and gauze

ALPROLIX must not be mixed with other injectable solutions or infusions.

Wash your hands before opening the container.

Preparation:

Check the name and dose of the medication on the container to ensure it contains the correct medication. Check the expiration date on the ALPROLIX carton. Do not use the medication if it is expired.
If ALPROLIX has been stored in the refrigerator, allow the ALPROLIX vial (A) and the solvent syringe (B) to reach room temperature before use. Do not use external heat.
Place the vial on a clean and flat surface. Remove the plastic cap from the vial.
Clean the top of the vial with one of the alcohol swabs (F) provided in the container and let it air dry. Do not touch the top of the vial or allow it to come into contact with anything once cleaned.
Remove the paper protector cap from the plastic vial adapter (D). Do not remove the adapter from its protective cap. Do not touch the inside of the vial adapter container.
Place the vial on a flat surface. Hold the vial adapter in its protective cap and place it directly over the top of the vial. Press firmly downward until the adapter snaps into place on top of the vial, with the adapter's spike penetrating the vial stopper.
Attach the plunger rod (C) to the solvent syringe by inserting the tip of the plunger rod into the syringe's plunger opening. Turn the plunger rod clockwise until it is securely seated on the syringe plunger.
Remove the tamper-evident plastic cap from the solvent syringe by bending it at the perforation until it breaks. Set the cap aside with the top facing down on a flat surface. Do not touch the inside of the cap or the syringe tip.
Remove the protective cap from the vial adapter by lifting it off and discarding it.
Connect the solvent syringe to the vial adapter by inserting the syringe tip into the adapter opening. Push firmly and turn the syringe clockwise until it is securely connected.
Slowly press the plunger rod downward to inject all of the solvent into the ALPROLIX vial.
With the syringe still connected to the adapter and the plunger rod pressed downward, gently swirl the vial in a circular motion until the powder is dissolved. Do not shake.
The final solution should be inspected visually before administration. The solution should be clear to slightly opalescent (pearly) and colorless. Do not use the solution if it is cloudy or contains visible particles.
Ensuring the syringe plunger rod is still fully pressed downward, invert the vial. Slowly pull the plunger rod to transfer all of the solution into the syringe through the vial adapter. Note: If using more than one vial of ALPROLIX per injection, each vial must be prepared separately according to the previous instructions (steps 1 to 13) and the solvent syringe must be removed, leaving the vial adapter in place. A single larger luer lock syringe may be used to withdraw the prepared contents from each of the vials.
Disconnect the syringe from the vial adapter by gently pulling the vial while turning it counterclockwise.
Discard the vial and adapter. Note: If the solution is not to be used immediately, the syringe cap should be carefully replaced over the syringe tip. Do not touch the syringe tip or the inside of the cap. After preparation, ALPROLIX can be stored at room temperature for a maximum of 6 hours before administration. After this time, the prepared ALPROLIX solution must be discarded. Protect it from direct sunlight.

Administration (Intravenous Injection):

ALPROLIX should be administered using the infusion set (E) provided in the container.

Open the infusion set container and remove the cap from the end of the tube. Connect the syringe with the prepared ALPROLIX solution to the end of the tube of the infusion set by turning it clockwise.
If necessary, apply a tourniquet and prepare the injection site by cleaning the skin well with the other alcohol swab provided in the container.
Remove all air from the infusion set tube by slowly pressing the plunger rod downward until the liquid has reached the needle of the infusion set. Do not push the solution through the needle. Remove the transparent plastic protector cap from the needle.
Insert the infusion set needle into a vein, as directed by your doctor or nurse, and remove the tourniquet. If desired, you can use one of the bandages (G) provided in the container to secure the plastic wings of the needle in place at the injection site. The prepared medication should be injected intravenously over several minutes. Your doctor may adjust the recommended injection rate to make it more comfortable for you.
Once the injection is complete and the needle is removed, the needle protector should be folded over and locked onto the needle.
Discard the used needle, any unused solution, the syringe, and the empty vial in an appropriate medical waste container, as these materials may cause harm to others if not disposed of properly. Do not reuse the equipment.

ALPROLIX 1,000 IU POWDER AND SOLVENT FOR INJECTABLE SOLUTION