Enoxaparin sodium Ledraxen

PATIENT INFORMATION LEAFLET

Patient Information Leaflet included with the packaging: patient information

Enoxaparin sodium Ledraxen, 2000 IU (20 mg)/0.2 mL, solution for injection
in a pre-filled syringe
Enoxaparin sodium Ledraxen, 4000 IU (40 mg)/0.4 mL, solution for injection
in a pre-filled syringe
Enoxaparin sodium Ledraxen, 6000 IU (60 mg)/0.6 mL, solution for injection
in a pre-filled syringe
Enoxaparin sodium Ledraxen, 8000 IU (80 mg)/0.8 mL, solution for injection
in a pre-filled syringe
Enoxaparin sodium Ledraxen, 10,000 IU (100 mg)/1 mL, solution for injection
in a pre-filled syringe
Enoxaparin sodium
This medicinal product is subject to additional monitoring. This will allow quick identification of new safety information. You can help by reporting any side effects you may get. See section 4 for how to report side effects.

You should carefully read the contents of this leaflet before using the medicine, as it contains important information for the patient.

• You should keep this leaflet, so you can read it again if you need to.
• If you have any further questions, ask your doctor, pharmacist, or nurse.
• This medicine has been prescribed for you only. Do not pass it on to others. It may harm them, even if their symptoms are the same as yours.
• If you get any side effects, talk to your doctor, pharmacist, or nurse. This includes any possible side effects not listed in this leaflet. See section 4.

Table of contents of the leaflet

• 1. What is Enoxaparin sodium Ledraxen and what is it used for
• 2. Important information before using Enoxaparin sodium Ledraxen
• 3. How to use Enoxaparin sodium Ledraxen
• 4. Possible side effects
• 5. How to store Enoxaparin sodium Ledraxen
• 6. Contents of the pack and other information

1. What is Enoxaparin sodium Ledraxen and what is it used for

Enoxaparin sodium Ledraxen contains the active substance enoxaparin sodium. It belongs to a group of medicines called low molecular weight heparins or LMWHs.
Enoxaparin sodium Ledraxen works in two ways:

• 1) It prevents the formation of new blood clots and stops existing clots from getting bigger. This helps your body to dissolve existing blood clots and prevents them from causing harm.
• 2) It prevents the formation of new blood clots in your blood.

Enoxaparin sodium Ledraxen can be used to:

• Treat blood clots that are already formed in your blood.
• Prevent blood clots from forming in your blood in the following situations: before and after surgery, when you are bedridden due to illness.

in patients who have had blood clots in their blood due to cancer, to further prevent the formation of new blood clots

• Prevent blood clots from forming in unstable angina (when not enough blood is being supplied to the heart muscle) or after a heart attack.
• Prevent blood clots from forming in the tubes of a dialyzer (used in people with severe kidney problems).

2. Important information before using Enoxaparin sodium Ledraxen

Do not use Enoxaparin sodium Ledraxen if:

• you are allergic to enoxaparin sodium or any of the other ingredients of this medicine (listed in section 6) or to heparin or other low molecular weight heparins such as nadroparin, tinzaparin or dalteparin. Symptoms of an allergic reaction may include rash, difficulty breathing or swallowing, swelling of the face, lips, tongue, mouth, throat or eyes.
• you have had a previous reaction to heparin that caused a significant decrease in the number of blood cells responsible for blood clotting (platelets) in the last 100 days.
• you have antibodies against enoxaparin in your blood.
• you have severe bleeding or a medical condition that increases the risk of bleeding, such as stomach ulcers, recent brain or eye surgery, or recent bleeding stroke.
• you are using Enoxaparin sodium Ledraxen to treat blood clots and spinal puncture or surgery is planned within 24 hours: lumbar puncture or surgery under spinal or epidural anesthesia. You should not use Enoxaparin sodium Ledraxen in these patients. If in doubt, consult your doctor or pharmacist before starting Enoxaparin sodium Ledraxen.

Warnings and precautions

Enoxaparin sodium Ledraxen should not be used interchangeably with other low molecular weight heparins. This is because they are not identical and differ in activity and instructions for use.
Before starting Enoxaparin sodium Ledraxen, you should discuss with your doctor or pharmacist if:

• you have ever had a reaction to heparin that caused a significant decrease in the number of blood cells responsible for blood clotting (platelets)
• you have a heart valve replacement
• you have endocarditis (infection of the membrane lining the heart)
• you have a history of stomach ulcers
• you have recently had a stroke
• you have high blood pressure
• you have diabetes or have blood vessel problems in the eyes caused by diabetes (diabetic retinopathy)
• you have recently had eye or brain surgery
• you are elderly (over 65 years), especially if you are over 75 years old
• you have kidney problems
• you have liver problems
• you are underweight or overweight
• you have high levels of potassium in your blood (which can be checked with a blood test)
• you are currently taking medications that may cause bleeding (see section 2 "Enoxaparin sodium Ledraxen and other medicines").
• you have spinal problems or have had spinal surgery.

If any of the above situations apply to you or if you are unsure, you should discuss this with your doctor or pharmacist before starting Enoxaparin sodium Ledraxen.
This medicine contains less than 1 mmol (23 mg) of sodium per dose, which means it is essentially "sodium-free".

Tests and monitoring

Before starting this medicine and periodically during treatment, your doctor may perform a blood test to check the number of platelets in your blood and the level of potassium in your blood.

Use in children and adolescents

The safety and efficacy of Enoxaparin sodium Ledraxen in children and adolescents have not been established.

Enoxaparin sodium Ledraxen and other medicines

Tell your doctor or pharmacist about all medicines you are taking, have recently taken, or might take.

• warfarin - a medicine used to thin the blood
• aspirin (also known as acetylsalicylic acid or ASA), clopidogrel, or other medicines used to prevent blood clots (see section 3 "Switching anticoagulant therapy")
• dextran injections - used as a blood substitute
• ibuprofen, diclofenac, ketorolac, or other non-steroidal anti-inflammatory medicines used to treat pain and swelling in arthritis and other conditions
• prednisolone, dexamethasone, or other medicines used to treat asthma, rheumatoid arthritis, and other conditions
• medicines that increase potassium levels in the blood, such as potassium salts, diuretics, and certain heart medicines.

Surgical procedures and anesthetics

If you are scheduled for a spinal puncture or surgery under spinal or epidural anesthesia, you should inform your doctor that you are using Enoxaparin sodium Ledraxen.

Pregnancy and breastfeeding

If you are pregnant or breastfeeding, think you may be pregnant, or are planning to have a baby, ask your doctor or pharmacist for advice before using this medicine.
In pregnant women with a mechanical heart valve, there may be an increased risk of blood clots. Your doctor should discuss this with you.
Women who are breastfeeding or planning to breastfeed should consult their doctor before starting this medicine.

Use in children and adolescents

The safety and efficacy of Enoxaparin sodium Ledraxen in children and adolescents have not been established.

Driving and using machines

Enoxaparin sodium Ledraxen does not affect the ability to drive or use machines.
It is recommended that your doctor documents the trade name and batch number of the medicinal product used.

3. How to use Enoxaparin sodium Ledraxen

This medicine should always be used exactly as your doctor or pharmacist has told you. If you are not sure, ask your doctor or pharmacist.

Taking the medicine

• Enoxaparin sodium Ledraxen will usually be given to you by a doctor or nurse. This is because it needs to be given by injection.
• Enoxaparin sodium Ledraxen is usually given by subcutaneous injection.
• Enoxaparin sodium Ledraxen may be given by intravenous injection after certain types of heart attack or after surgery.
• Enoxaparin sodium Ledraxen may be introduced into the dialysis tube returning blood to the body (the "arterial line") at the start of the dialysis session.
• Enoxaparin sodium Ledraxen must not be given by intramuscular injection.

Dose of the medicine

• Your doctor will decide what dose of Enoxaparin sodium Ledraxen you should have. This will depend on the reason for your treatment.
• In patients with kidney problems, you may be given a lower dose of Enoxaparin sodium Ledraxen.
• 1) Treatment of blood clots that have already formed in your blood
• The usual dose is 150 IU (1.5 mg) per kilogram of body weight once daily or 100 IU (1 mg) per kilogram of body weight twice daily.
• Your doctor will decide how long you should receive Enoxaparin sodium Ledraxen.
• 2) Prevention of blood clots in your blood during surgery or when you are bedridden due to illness
• The dose will depend on your risk of developing a blood clot. You will usually be given Enoxaparin sodium Ledraxen at a dose of 2000 IU (20 mg) or 4000 IU (40 mg) each day.
• For planned surgery, the first injection is usually given 2 hours or 12 hours before surgery.
• If you are bedridden due to illness, you will usually be given Enoxaparin sodium Ledraxen at a dose of 4000 IU (40 mg) each day.
• Your doctor will decide how long you should receive Enoxaparin sodium Ledraxen.
• 3) Prevention of blood clots in patients with unstable angina or after a heart attackEnoxaparin sodium Ledraxen can be used in two different types of heart attack. The dose of Enoxaparin sodium Ledraxen will depend on your age and the type of heart attack you have had.

Non-ST segment elevation myocardial infarction (heart attack without ST segment elevation):

• The usual dose is 100 IU (1 mg) per kilogram of body weight every 12 hours.
• Your doctor will usually recommend that you also take aspirin (acetylsalicylic acid).
• Your doctor will decide how long you should receive Enoxaparin sodium Ledraxen. ST segment elevation myocardial infarction (heart attack with ST segment elevation) in patients under 75 years of age:
• The initial dose of Enoxaparin sodium Ledraxen is 3000 IU (30 mg) given as an intravenous injection.
• At the same time, Enoxaparin sodium Ledraxen will also be given as a subcutaneous injection. The usual dose is 100 IU (1 mg) per kilogram of body weight every 12 hours.
• Your doctor will usually recommend that you also take aspirin (acetylsalicylic acid).
• Your doctor will decide how long you should receive Enoxaparin sodium Ledraxen. ST segment elevation myocardial infarction (heart attack with ST segment elevation) in patients 75 years of age or older:
• The usual dose is 75 IU (0.75 mg) per kilogram of body weight every 12 hours.
• The maximum dose of Enoxaparin sodium Ledraxen in the first two doses is 7500 IU (75 mg).
• Your doctor will decide how long you should receive Enoxaparin sodium Ledraxen.

Patient undergoing percutaneous coronary intervention (PCI):
Depending on when the last dose of Enoxaparin sodium Ledraxen was given, your doctor may decide to give an additional dose of Enoxaparin sodium Ledraxen before the PCI procedure. This will be given as an intravenous injection.

• 4) Prevention of blood clots in the tubes of a dialyzer
• The usual dose is 100 IU (1 mg) per kilogram of body weight.
• Enoxaparin sodium Ledraxen is injected into the tube returning blood to the body (the "arterial line") at the start of the dialysis session. This dose is usually sufficient for a 4-hour dialysis session. However, if necessary, your doctor may give you an additional dose of 50 IU to 100 IU (0.5 to 1 mg) per kilogram of body weight. Self-administration of Enoxaparin sodium Ledraxen. If you are able to inject Enoxaparin sodium Ledraxen yourself, your doctor or nurse will show you how to do it. Do not attempt to inject yourself if you have not been trained. If you are unsure, contact your doctor or nurse immediately. Injecting the medicine correctly under the skin (subcutaneously) can reduce pain and bruising at the injection site. Before self-administering Enoxaparin sodium Ledraxen
• Prepare all the necessary items: syringe, alcohol swab, soap and water, and a container for medical waste.
• Check the expiration date on the packaging. Do not use the medicine after the expiration date.
• Check that the syringe is not damaged and that the liquid is clear. If not, use another syringe.
• Make sure you know what dose you are supposed to inject.
• Look at your abdomen to check if the last injection has caused redness, discoloration, swelling, discharge, or if it is still painful. If so, contact your doctor or nurse.

Instructions for syringes without a safety system

• Preparing the injection site: Before injecting, wash your hands and dry them. Use a swab to clean (without rubbing) the chosen injection site. A different area of the abdomen should be used for each injection.
• Remove the protective cap from the needle. It is possible that a drop may form at the tip of the needle. If this happens, remove the drop by tapping the syringe (with the needle pointing downwards) before injecting.
• Perform the injection: The pre-filled syringe is ready for immediate use. Choose a site on the right or left side of the abdomen. It should be at least 5 cm away from the navel and towards the side. Hold the syringe so that the needle is pointing downwards (at a 90° angle), into the thickness of the skin fold created by pinching the skin between the thumb and index finger of the operator. Hold the skin fold throughout the injection.
• Dispose of the syringe immediately in a suitable container.

Any unused medicinal product or waste material should be disposed of in accordance with local regulations.

Instructions for syringes with a safety system

• Preparing the injection site: Before injecting, wash your hands and dry them. Use a swab to clean (without rubbing) the chosen injection site. A different area of the abdomen should be used for each injection.
• First, bend the guard to the side by about 90 degrees. Note: Do not remove the cap before bending the guard.
• Remove the protective cap from the needle. It is possible that a drop may form at the tip of the needle. If this happens, remove the drop by tapping the pre-filled syringe (with the needle pointing downwards) before injecting.

• Perform the injection: The pre-filled syringe is ready for immediate use. Choose a site on the right or left side of the abdomen. It should be at least 5 cm away from the navel and towards the side. Hold the syringe so that the needle is pointing downwards (at a 90° angle), into the thickness of the skin fold created by pinching the skin between the thumb and index finger of the operator. Hold the skin fold throughout the injection.

• Secure the needle guard: Using one hand, place the guard on a hard, stable surface. Important: Do not use your finger to hold the needle in the guard. Then press the guard. Bend the guard until the needle clicks into the plastic part.

• Dispose of the syringe immediately in a suitable container.

After the injection

• 1) To avoid bruising, do not rub the injection site after the injection.
• 2) Dispose of the used syringe in a container for medical waste. Close the container and store it out of sight and reach of children. If the container is full, dispose of it according to the doctor's or pharmacist's instructions.

Any unused medicinal product or waste material should be disposed of in accordance with local regulations.

Switching anticoagulant therapy

• Switching from Enoxaparin sodium Ledraxen to vitamin K antagonist anticoagulants (such as warfarin)Your doctor will recommend that you have blood tests to measure your INR and will tell you when to stop taking Enoxaparin sodium Ledraxen.
• Switching from vitamin K antagonist anticoagulants (such as warfarin) to Enoxaparin sodium LedraxenYou should stop taking the vitamin K antagonist. Your doctor will recommend that you have blood tests to measure your INR and will tell you when to start taking Enoxaparin sodium Ledraxen.
• Switching from Enoxaparin sodium Ledraxen to direct oral anticoagulantsYou should stop taking Enoxaparin sodium Ledraxen. Then, start taking the direct oral anticoagulant 0 to 2 hours before the scheduled time of the next injection; and then continue taking the medicine as usual.
• Switching from direct oral anticoagulant therapy to Enoxaparin sodium LedraxenYou should stop taking the direct oral anticoagulant. Treatment with Enoxaparin sodium Ledraxen can be started 12 hours after the last dose of the direct oral anticoagulant.

Overdose of Enoxaparin sodium Ledraxen

If you think you have used too much or too little Enoxaparin sodium Ledraxen, contact your doctor, pharmacist, or nurse immediately, even if you do not feel any signs of a problem. If a child accidentally injects or ingests Enoxaparin sodium Ledraxen, seek immediate medical attention at the hospital emergency department.

Missing a dose of Enoxaparin sodium Ledraxen

If you miss a dose of the medicine, take it as soon as possible. Do not take a double dose to make up for a missed dose. Keeping a diary can help you make sure you do not miss a dose of the medicine.

Stopping Enoxaparin sodium Ledraxen

It is important to continue injecting Enoxaparin sodium Ledraxen until your doctor tells you to stop. If you stop treatment, a blood clot may form, which can be very dangerous.
If you have any further questions on the use of this medicine, ask your doctor, pharmacist, or nurse.

4. Possible side effects

Like all medicines, this medicine can cause side effects, although not everybody gets them.

Severe side effects

You should stop using Enoxaparin sodium Ledraxen and consult your doctor or nurse immediately if you experience symptoms of a severe allergic reaction (such as rash, difficulty swallowing or breathing, swelling of the face, lips, tongue, mouth, throat or eyes).
If you experience any of the following symptoms, stop using enoxaparin and seek medical attention immediately:

• Red, scaly, widespread rash with thickening of the skin and blisters, accompanied by fever. Symptoms usually appear at the beginning of treatment (acute generalized exanthematous pustulosis).

Like other similar medicines (used to reduce blood clotting), Enoxaparin sodium Ledraxen may cause bleeding. This can be life-threatening. In some cases, bleeding may not be immediately visible.

You should contact your doctor immediately if:

• you experience any bleeding that does not stop by itself
• you experience signs of excessive bleeding such as weakness, tiredness, paleness, dizziness with headaches, or unexplained swelling. Your doctor may decide to monitor you more closely or change your medicine.

You should contact your doctor immediately:

• if you experience any signs of a blood clot blocking a blood vessel, such as: cramp-like pain, redness, increased warmth, or swelling in one of your legs - these are symptoms of deep vein thrombosis;

or
shortness of breath, chest pain, fainting, or coughing up blood - these are symptoms of pulmonary embolism.

• if you experience painful rash or purple spots under the skin that do not fade on pressure. Your doctor may perform blood tests to check the number of platelets in your blood.

Other side effects:

Very common (may affect more than 1 in 10 people):

• bleeding;
• increased liver enzyme activity. Common (may affect up to 1 in 10 people):
• increased tendency to bruise - this may be due to a decrease in the number of platelets in your blood;
• red spots on the skin - these changes are more likely to occur at the injection sites of Enoxaparin sodium Ledraxen;
• skin rash (hives);
• itchy, red skin;
• bruising or pain at the injection site;
• decreased red blood cell count;
• increased platelet count;
• headache. Uncommon (may affect up to 1 in 100 people):
• sudden severe headache - this could be a sign of bleeding in the brain;
• feeling of tenderness and swelling in the abdomen - this could be a sign of bleeding in the stomach;
• large, red, irregularly-shaped patches on the skin, with blisters or without blisters;
• skin irritation (local irritation);
• you may notice yellowing of the skin or eyes and darker urine
• this may indicate liver problems. Rare (may affect up to 1 in 1000 people):
• severe allergic reaction - symptoms may include rash, difficulty swallowing or breathing, swelling of the lips, face, throat, or tongue;
• high levels of potassium in the blood - this is more likely to occur in people with kidney problems or diabetes; your doctor may check this with a blood test;
• increased eosinophil count in the blood - your doctor may check this with a blood test;
• hair loss;
• osteoporosis (a condition where bones are more likely to break) after long-term use of the medicine;
• tingling, numbness, and muscle weakness (especially in the lower part of the body) after spinal puncture or epidural anesthesia;
• loss of control over urination or bowel movements (a condition where you are unable to control when you go to the toilet);
• hardening or a lump at the injection site.

Reporting side effects

If you experience any side effects, including any not listed in this leaflet, you should tell your doctor, pharmacist, or nurse.
Side effects can be reported directly to the Department of Drug Monitoring, Urząd Rejestracji Produktów Leczniczych, Wyrobów Medycznych i Produktów Biobójczych, Al. Jerozolimskie 181C, 02-222 Warszawa.
Tel.: + 48 22 49 21 301, fax: + 48 22 49 21 309, website: https://smz.ezdrowie.gov.pl
Side effects can also be reported to the marketing authorization holder.
By reporting side effects, you can help provide more information on the safety of this medicine.

5. How to store Enoxaparin sodium Ledraxen

Do not store above 25°C.
Do not freeze.
Keep the medicine out of sight and reach of children.
Do not use this medicine after the expiry date stated on the packaging. The expiry date refers to the last day of the month stated.
Do not use this medicine if you notice any change in the appearance of the solution.
Medicines should not be disposed of via wastewater or household waste. Ask your pharmacist how to dispose of medicines no longer required. These measures will help protect the environment.

6. Contents of the pack and other information

What Enoxaparin sodium Ledraxen contains

2000 IU (20 mg)/0.2 mL solution for injection:

• The active substance is enoxaparin sodium. Each mL contains 100 mg of enoxaparin sodium. Each pre-filled syringe of 0.2 mL contains 2000 IU of anti-Xa activity (which is equivalent to 20 mg) of enoxaparin sodium.
• The other ingredient is water for injection.

4000 IU (40 mg)/0.4 mL solution for injection

• The active substance is enoxaparin sodium. Each mL contains 100 mg of enoxaparin sodium. Each pre-filled syringe of 0.4 mL contains 4000 IU of anti-Xa activity (which is equivalent to 40 mg) of enoxaparin sodium.
• The other ingredient is water for injection.

6000 IU (60 mg)/0.6 mL solution for injection

• The active substance is enoxaparin sodium. Each mL contains 100 mg of enoxaparin sodium. Each pre-filled syringe of 0.6 mL contains 6000 IU of anti-Xa activity (which is equivalent to 60 mg) of enoxaparin sodium.
• The other ingredient is water for injection.

8000 IU (80 mg)/0.8 mL solution for injection

• The active substance is enoxaparin sodium. Each mL contains 100 mg of enoxaparin sodium. Each pre-filled syringe of 0.8 mL contains 8000 IU of anti-Xa activity (which is equivalent to 80 mg) of enoxaparin sodium.
• The other ingredient is water for injection.

10,000 IU (100 mg)/1 mL solution for injection

• The active substance is enoxaparin sodium. Each mL contains 100 mg of enoxaparin sodium. Each pre-filled syringe of 1.0 mL contains 10,000 IU of anti-Xa activity (which is equivalent to 100 mg) of enoxaparin sodium.
• The other ingredient is water for injection.

What Enoxaparin sodium Ledraxen looks like and contents of the pack

2000 IU (20 mg)/0.2 mL solution for injection:
Colorless or pale yellow, clear liquid
0.2 mL solution in a syringe made of neutral glass type I with a fixed needle closed by a rubber stopper and a plunger made of PP, in a cardboard box.
Pack sizes: 1, 2, 6, 10, 20, or 50 pre-filled syringes.
4000 IU (40 mg)/0.4 mL solution for injection:
Colorless or pale yellow, clear liquid
0.4 mL solution in a syringe made of neutral glass type I with a fixed needle closed by a rubber stopper and a plunger made of PP, in a cardboard box.
Pack sizes: 1, 2, 6, 10, 20, 30, or 50 pre-filled syringes.
6000 IU (60 mg)/0.6 mL solution for injection:
Colorless or pale yellow, clear liquid
0.6 mL solution in a syringe made of neutral glass type I with a fixed needle closed by a rubber stopper and a plunger made of PP, in a cardboard box.
Pack sizes: 1, 2, 6, 10, 12, 20, 24, 30, or 50 pre-filled syringes.
8000 IU (80 mg)/0.8 mL solution for injection:
Colorless or pale yellow, clear liquid
0.8 mL solution in a syringe made of neutral glass type I with a fixed needle closed by a rubber stopper and a plunger made of PP, in a cardboard box.
Pack sizes: 1, 2, 6, 10, 12, 20, 24, 30, or 50 pre-filled syringes.
10,000 IU (100 mg)/1 mL solution for injection:
Colorless or pale yellow, clear liquid
1 mL solution in a syringe made of neutral glass type I with a fixed needle closed by a rubber stopper and a plunger made of PP, in a cardboard box.
Pack sizes: 1, 2, 6, 10, 12, 20, 24, or 30 pre-filled syringes.
For the 0.2 mL and 0.4 mL pre-filled syringes, there is no graduation on the syringe.
For the 0.6 mL, 0.8 mL, and 1 mL pre-filled syringes, the syringes are graduated.
Not all pack sizes may be marketed.

Marketing authorization holder and manufacturer

Marketing authorization holder

Venipharm
4 Bureaux de la Colline
92210 Saint-Cloud
France
+33 1 47 11 0447
[email protected]

Importer

Centre Spécialités Pharmaceutiques
ZAC des Suzots
35 rue de la Chapelle
63450 Saint-Amant Tallende
France

This medicine has been authorized in the EEA member states under the following names:

Austria: Enoxaparin Ledraxen
Cyprus: Ledraxen
Czech Republic: Enoxaparin sodium Ledraxen
Finland: Enoxaparin Ledraxen
Croatia: Enoksaparin natrij Ledraxen
United Kingdom (Northern Ireland): Enoxaparin Ledraxen
Lithuania: Enoxaparin sodium Ledraxen
Latvia: Enoxaparin sodium Ledraxen
Norway: Enoxaparin Ledraxen
Poland: Enoxaparin sodium Ledraxen
Portugal: Enoxaparina sódica Ledraxen
Slovakia: Ledraxen
Slovenia: Enoksaparin Ledraxen
Germany: Enoxaparin Ledraxen
France: Enoxaparine Arrow
Sweden: Enoxaparin Ledraxen
Spain: Enoxaparina Ledraxen

Date of last revision of the leaflet: 06/2023

Other sources of information

Detailed information on this medicine is available on the website of the Urząd Rejestracji Produktów Leczniczych, Wyrobów Medycznych i Produktów Biobójczych.
Website: https://smz.ezdrowie.gov.pl