Check the suspension.
When properly mixed, the suspension will have a uniform, dense, and milky appearance.
The microspheres will be visible in the liquid.
Immediately proceed to the next step to avoid sedimentation.
Transfer the suspension to the syringe
Invert the vial completely.
Pull the plunger rod slowly down to transfer the entire contents of the vial to the syringe.
Remove the vial adapter
Hold the syringe by the white ring and disengage it from the vial adapter.
Discard the vial and vial adapter properly.
Step 3 | Place the needle | |
Choose the correct needle Choose the needle according to the injection site (gluteal or deltoid). | Place the needle Open the blister pack by the partially separated area and use it to pick up the base of the needle, as shown. Holding the white ring of the syringe,attach the syringe to the needle of the luer with a firmrotational movement in a clockwise directionuntil it is securely attached. Do nottouch the opening of the needle of the luer. This may lead to contamination. | Resuspend the microspheres Remove the blister pack completely. Just before injection, shake the syringe again vigorously, in case sedimentation has occurred. |
Step 4 | Inject the dose | |||
Remove the transparent needle protector Moving the needle safety device towards the syringe, as shown. Then, hold the white ring of the syringe and carefully remove the transparent needle protector. Do nottwist the transparent needle protector, as the luer connection may be lost. | Remove air bubbles Holding the syringe upwards and gently tapping to make the air bubbles reach the top. Slowly and carefully press the plunger rod to remove the air. | Inject Inject the entire contents of the syringe intramuscularly (IM) into the gluteal or deltoid muscle of the patient. The gluteal injection should be made in the upper outer quadrant of the gluteus. Do not administer intravenously. | Protect the needle in the safety device Usingone hand, place the needle safety device at a 45-degree angle on a flat, hard surface. Press down firmly and quickly until the needle is completely inside the safety device. To avoid a needlestick injury: Do notuse two hands. Do notdeliberately disengage or manipulate the needle safety device. Do notattempt to straighten the needle or attach the safety device if the needle is bent or damaged. | Properly dispose of the needles Check that the needle safety device is securely attached. Dispose of it in a used needle container. Also discard the needle provided in the package and the unused dose. |
Есть вопросы по этому лекарству или вашим симптомам? Свяжитесь с лицензированным врачом для получения помощи и персонализированного ухода.