Tezspire 210 mg injectable solution in pre-filled syringe
tezepelumab
These ‘Instructions for Use’ contain information on how to inject Tezspire. |
Before using Tezspire pre-filled syringe, a healthcare professional should teach you or your caregiver how to use it correctly. Read these ‘Instructions for Use’ before starting to use Tezspire pre-filled syringe and each time you receive another injection.This information should not replace consultation with your healthcare professional about your disease and treatment. If you or your caregiver have any doubts, consult your healthcare professional. |
Important information you should know before injecting Tezspire | |
Keep Tezspire in a refrigerator between 2°C and 8°C in its outer packaging until you are ready to use it.Tezspire can be kept at room temperature between 20°C and 25°C in its outer packaging for a maximum of 30 days. Once Tezspire has reached room temperature,do notput it back in the refrigerator. Dispose of the Tezspire that has been stored at room temperature for more than 30 days (see Step 10). | |
Do notuse your Tezspire pre-filled syringe if:
| Do notshake your pre-filled syringe. Do notshare or use your pre-filled syringe more than 1 time. Do notexpose your Tezspire pre-filled syringe to heat. |
If any of the above occurs, dispose of the syringe in a sharps container and use a new Tezspire pre-filled syringe. Each Tezspire pre-filled syringe contains 1 dose of Tezspire that is for single use only. Keep Tezspire pre-filled syringe and all medicines out of the reach and sight of children. Tezspire is administered only as a subcutaneous injection. |
Your Tezspire pre-filled syringe | |||||
Do notremove the needle cap until Step 7 of these instructions when you are ready to inject Tezspire. Do nottouch the activation clips of the needle protector. This will prevent the safety device (needle protector) from being activated too soon. | |||||
Before use | After use | ||||
Activation clips of the needle protector | Window of vision | Label with expiration date | Needle | ||
Tip of plunger | |||||
Plunger | Body of syringe | Needle cap | Plunger | Needle protector | |
Bevel for fingers | Needle |
Preparing to inject Tezspire Step 1: Gather materials | ||||
| ||||
Pre-filled syringe | Alcohol wipe | Cotton ball or gauze | Bandage | Sharps container |
Step 2: Prepare to use your Tezspire pre-filled syringe | |
Allow Tezspire to reach room temperature between 20°C and 25°C for approximately 60 minutes or more (up to a maximum of 30 days) before administering the injection. Keep the pre-filled syringe in its outer packaging to protect it from light. Do notheat the pre-filled syringe in any other way. For example,do notheat it in a microwave or warm water, under direct sunlight or near other heat sources. | |
Do notput Tezspire back in the refrigerator after it has reached room temperature. Dispose of the Tezspire that has been stored at room temperature for more than 30 days. Do notremove the needle cap until Step 7. |
Step 3: Remove the pre-filled syringe | |
Hold the body of the syringeto remove the pre-filled syringe from its tray.Do nothold the plunger. | |
Body of syringe |
Step 4: Check the pre-filled syringe | |
Check if the pre-filled syringe is damaged. Do notuse the pre-filled syringe if it is damaged. Check the expiration dateon the pre-filled syringe.Do notuse the pre-filled syringe if the expiration date has passed. Observe the liquid through the window of vision.The liquid should be transparent and colorless to light yellow. Do notinject Tezspire if the liquid is cloudy, discolored, or contains large particles. You may see small air bubbles in the liquid. This is normal. You do not need to do anything about it. | |
Expiration date |
Injecting Tezspire Step 5: Choose an injection site | |
If you are injecting yourself, therecommended injection siteis the front of the thigh or the lower abdomen.Do notinject in the arm. A caregiver can inject you in the upper arm, thigh, or abdomen. For each injection, choose a different site, separated by at least 3 cm from the site of the previous injection. Do notinject:
|
Step 6: Wash your hands and clean the injection site | |
Wash your hands thoroughly with soap and water. Clean the injection site with an alcohol wipe in a circular motion. Let it air dry. Do nottouch the cleaned area before injecting. Do notfan or blow on the cleaned area. | |
Step 7: Remove the needle cap | |
Do notremove the needle cap until you are ready to inject Tezspire. Hold the body of the syringe with one hand and carefully remove the needle cap with the other hand. Do nothold the plunger or the tip of the plunger while removing the needle cap. Put the needle cap aside and dispose of it later. You may see a drop of liquid at the end of the needle. This is normal. Do nottouch the needle or let it touch any surface. Do notput the needle cap back on the syringe. |
Step 8: Inject Tezspire | |
Hold the pre-filled syringe with one hand as shown. Use your other hand to gently pinch and hold the skin area where you want to inject. This will make the skin firmer. Do notpush the tip of the plunger until the needle is inserted into the skin. Do notpull back on the tip of the plunger at any time. Inject Tezspire following the steps in figuresa,b, andc. |
Insert the needle completely into the pinched skin at a 45-degree angle. Do nottry to change the position of the pre-filled syringe after inserting it into the skin. | Use your thumb to push the tip of the plunger. Continue pushing until the end to ensure that all the medicine has been injected. | Keep your thumb pushing the tip of the plunger while removing the needle from the skin. Release the plunger slowly until the needle protector covers the needle. |
Step 9: Check the injection site | |
You may see a small amount of blood or liquid where you injected. This is normal. Gently press on the skin with a cotton ball or gauze until the bleeding stops. Do notrub the injection site. If necessary, cover the injection site with a small bandage. |
Disposing of Tezspire Step 10: Dispose of the used pre-filled syringe safely | |
Each pre-filled syringe contains a single dose of Tezspire andcannot be reused.Do notput the needle cap back on the syringe. Dispose of the syringe and needle cap in asharps containerimmediately after use. Dispose of the other used materials in household trash. Do notthrow the used pre-filled syringe in household trash. |
Guidelines for disposal |
Dispose of the full container according to the instructions of your healthcare professional or pharmacist. Do notthrow the used sharps container in household trash unless your community allows it. Do notrecycle the used sharps container. |
Have questions about this medication or your symptoms? Connect with a licensed doctor for guidance and personalized care.